Dive Rite 1^st Stage Only

Same 1^st stage as in all Dive Rite Regulators. Many Tech divers like all their regs to match, that way they can use a stage or argon reg as a spare backup in case of a primary reg failure.

OMS ^® 1^st Stage Only

Unbalanced Piston design.

Perfect reg for those looking for a good inexpensive 1^st stage either for a deco bottle or Argon rig.

An absolute nessesity for Argon reg. or any fisrts stage with no second stage. Pervents hose rupture in the event of HP seat failure.

Small SPG for Lets you check tank pressure before the dive. This miniature SPG screws directly into the HP port of the 1st stage and is a perfect option for an Argon reg. or Pony Reg.

Low Pressure Inflator Hose

Click here for list

Dry Suit Inflator Hose

Drysuit hoses are similar to LPI hoses but have a larger quick disconnect for use with heavy gloves. Available in various stock and custom lengths.

Click here for list

Stainless bands used to secure Argon bottle to backplate.

Inflating your drysuit with gas mixtures containing helium can adversely affect the suit's insulating properties. Because argon is a superb insulating gas, divers sometimes carry a small 6 cu. ft. or 13 cu. ft. cylinder containing argon with just a first-stage regulator and low-pressure drysuit inflator hose. The Dive Rite® drysuit inflation-bottle mounting system allows you to attach the bottle to a TransPac™ or backplate between your back and the cylinders. You can mount the system on the right or left side. It rides close to the side of your body under your arm and out of the way.The system consists of the following parts:

• One medium Stainless Steel quick link
• One Stainless Steel TransPac assembly screw
• One 1.0-inch cinch strap with plastic slide, a belt slide, and a D-ring
• Two feet of 2.0-inch webbing mounting strap with a grommet on one end and loop with a belt slide on the other

Click here for list