We get a sweet deal on these medium wt. surface marker bags. All the strength of many other bags at a fraction of the cost Perfect for occasional lifting or as a deco bag.

• Over 6’ Tall
• Nylon heat sealed material
• Dump valve with attached pull ball
• Brass clip
• Velcro, to roll up
• Colors: Orange/ black trim,Yellow/ black trim

Dive Rite "Quick-Draw" Sleeve is a great place to store your liftbags or SMB. Just attach it to the bottom or side of your backplate with quick links, line, or zipties. Your bag is always at your finger tips but never in your way.

When surface visibility from a distance is important, such as when the diver is hanging under a bag during deco, many divers choose the Marking Bag. Similar in operation to a lift bag, but tube-shaped like a "SeeMe," the Marking Bag is 60-inches tall by 8-inches wide, with an over pressure relief valve (OPV) and has reflective tape at the top end. The Dive Rite Marking Bags also incorporate an ingenious funnel-shaped internal baffle that allows the bag to be inflated as usual at depth, but prevents the bag from unintentionally deflating should it fall over while on the surface. The Marking Bag is available in color choices of Safety Orange or Neon Yellow.

The Marking Bag rolls up and is securely closed with a Velcro™ closure and clips to the diver with the double-ended snap provided. The Marking Bag can also be carried using a separately ordered "Quick-Draw" Sleeve.

Closed circuit version of above.

These SMB’s are inflated with a standard LPI hose rather than a regulator. Preferred by some divers as it does not require removing a regulator from the mouth or risking a free flow. Also these bags are almost impossible to accidentally dump due to their design. The Marking Bag is 60-inches tall by 8-inches wide, with an over pressure relief valve (OPV) and has reflective tape at the top end. The Marking Bag is available in Safety Orange .

The Marking Bag rolls up and is securely closed with a Velcro™ closure and clips to the diver with the double-ended snap provided.

The Personal Float may be the single most important piece of equipment you ever own. Detachable 12" x 12" dive flags on both sides of the float's top makes it highly visible for a considerable distance. One-way oral inflation valve easily allows the diver to tightly inflate the float at the surface, while a one-way flapper valve allows air into the bottom of the float but not out. Over-pressure/dump valve vents excess air as the Personal Float ascends to the surface. The handle at the top of the float can be used to attach a light. The float is constructed out of very durable poly-urethane coated nylon material. A velcro strip at the bottom holds the float in a tight roll when not in use. A four pound weight will make the personal float stand up vertically in the water. Personal floats are available in different buoyancies: 35 lbs lift, 75 lbs lift, and 110 lbs.

The Spear Fishing Buoys are smaller versions of the personal floats that are designed to be used by spear fishermen to bring speared fish to the surface. They can also be used as small lift bags or as buoys to mark dive locations. They have a one way mouth inflation valve, an over-pressure valve and a one way easy inflation valve at the bottom.

Manta Status 100 lift bag

The Status 100 lift bag has the following features: An 8” x 16” writing panel located at the top of the bag on both sides. This revolutionary feature enables a diver to indicate the “Status” of their dive to people on the surface. Whether you need more gas, have a long hang or you want to let people know you are just OK, the Status 100 allows you to do so. Also incorporated into the Status 100 are two pieces of Scotch-lite high intensity reflective strips. At the top of the Status 100 is a slot large enough to insert a “glow stick” and at the mouth of the bag is a holder for a large erasable marking crayon included. The Status 100 is perfect for floating decompression, retrieval of artifacts and drift diving.

Constructed from a very durable poly-urethane coated nylon high visibility yellow material, the Status 100 is light weight and very compact. When folded and rolled up it is only 8 1⁄2” long and 3” thick!!

This is an emergency only tube. If you are stuck and the last resort is to get somebody to come down to the decompression line to help, such as bring the diver more gas then this is the bag. The bag has 50 pounds of lift.

OMS 50lb Tube

This is a great general size tube. This bag works great for emergency upline use. The 5 foot length of the tube helps mark the spot where the diver will surface once the diver completes their decompression. This bag is also popular with drift decompression divers.

Trident Diver Marker Bag

This inexpensive SMB is great as an emergency backup. Small and compact, this will roll up smaller than most safety sausages and can still be deployed at depth. Bright yellow color aids in diver location. A must if you plan on doing drift decompression.

Buddy SMBC

SMBC - The original self-sealing SMB with unique internal valve. Bright Red SMBC, HiViz Red & Yellow. AP5 over-pressure / dump valve
Features

• All models can be easily filled from your second stage or spare air system. Dimensions: 1.4 m long x 20cm wide.
• SMBC - Surface Marker Buoy Closed (self-sealing) - developed exclusively by the A.P.Valves' design team - has what appears to be an open ended base but as soon as you fill the buoy the internal baffle is forced shut preventing the buoy from accidentally deflating on the surface
• The SMBC also features a stream-lining flap which closes over the mouth when used in a current to prevent any sea-anchor effect. The AP5 over-pressure / dump valve prevents the buoy from bursting and allows deflation after use
• Simply attach a line or reel and you have a superb decompression marker buoy and also a buoy that can be used as a standard surface marker
• The SMBC and SMBCi now also feature an eyelet at the top end, which can be used to attach a strobe, a message slate or identification marker
• All buoys roll up neatly for pocket storage

Buddy SMBCi

The new self-sealing BUDDY SMBCi (Surface Marker Buoy - Closed with Inflation Cylinder) features a lightweight aluminum mini-cylinder (choice of 0.1 or 0.2 litre) which is mounted at the foot of the buoy just above the internal baffle.
Features

• Simply attach a line or reel and you have a superb decompression marker buoy and also a buoy that can be used as a standard surface marker
• The SMBCi features a lightweight aluminum mini-cylinder (choice of 0.1 or 0.2 litre) which is mounted at the foot of the buoy just above the internal baffle
• Cylinder Dimensions: 0.1 litre - 115mm x 50mm diam. 0.2 litre - 180mm x 50mm diameter
• Easily replenished from the main cylinder, the mini-cylinder is small enough to fold unobtrusively inside the SMB to be stowed in pouch or pocket
• Deployment is simply a question of unfurling the SMB and cracking open the cylinder
• Developed from the popular BUDDY SMBC, the SMBCi also features a self-sealing baffle so that when inflated the mouth is sealed preventing accidental deflation at the surface
• Unlike normal open-ended 'sausage-style' SMBs both the SMBC and the SMBCi can be waved to attract attention at the surface
• An over-pressure / dump valve prevents bursting and allows deflation after use
• One key advantage of the BUDDY SMBCi over similar systems is that it can still be inflated via the baffle in the usual manner – with a DV or an air-gun - in the event that the diver has forgotten to fill the mini-cylinder
• Also like the SMBC the new marker buoy features a specially designed flap which folds over the mouth to prevent any ‘sea-anchor’ effect when being towed as a permanent marker buoy
• The new BUDDY SMBCi is available with either DIN or International A-clamp fittings