Converts first stage outlet from
1/2" x 20 to 3/8" x 24

Converts first stage outlet from 3/8" x 24 to 1/2" x 20

Converts a 9/16" x 18 hose to Standard 3/8" x 24 LP Hose

Regulator hose union: Allows 2 hoses (3/8") to be mated

Poseidon Metric to 3/8”

For installing Current Low pressure inflator hoses or reg hoses on Metric Poseidon’s.

¼” male NPT to 3/8 Oring

Allows Regulator or LPI hose to be attached to ¼” Female ports, Sometimes used to attach some O2 regulators to long Reg. Hose for surface supplied O2.

Dual 360 Deg. Reg Swivel

360 Degree reg. Swivel

A banjo fitting which allows full 360 degree articulation of most 2nd stages without affecting the flow rate. Popular with sidemount divers on their left regulator.

3/8” male to (3) 3/8” Females

Three port swivel tee: converts one 3/8 LP port to triple 3/8 outlet ports.

45 degree angle adapter for regulators. Helps prevent hose pull.

1/2” male to 1/2” female 90 degree swivel adapter.

A 90 degree swivel for right hand installation of LP hoses with 1/2" male end fittings.

3/8” male to 3/8” female 90 degree swivel adapter.

A 90 degree swivel for right hand installation of LP hoses with 3/8" male end fittings.

Converts 3/8" male to ¼” female NPT

Converts 3/8" body port to 1/4" male NPT.

Converts swivel end of hose to 1/4" male NPT

57300 BC coupler male stud to male 1/4 NPT: for putting air guns, tire inflators, etc. onto BC hoses.

57301 Sames as #57300, but with 1/8" MNPT

Scuba Pro coupler male stud to male ¼” NPT for putting air guns, tire inflators, etc. onto BC hoses.

Mares / Seaquest coupler male stud to male 1/4 NPT for putting air guns, tire inflators, etc. onto BC hoses.

Tire inflator Connects to BC LP Inflator Hose.

Get a boost! Remember Murphy is your dive buddy! You’ll always get a flat when you are running late to get to the dive boat.Use your tanks to fill that flat spare tire.