Converts first stage outlet from 3/8" x 24 male to 7/16" x 20 female

Converts first stage outlet from 7/16" x 20 male to 3/8" x 24 female

High Pressure spacer. Converts 7/16" x 20 to 7/16" x 20

High pressure port (7/16) extender; Shims hoseless computer transducer out from regulator body.

Poseidon Metric to 7/16”

For installing Curent Spgs and consoles on Metric Poseidon.

7/16” male to 7/16” female 90 degree swivel adapter.

57190 Same as #57140, for current consoles with 7/16-20 threads. Allows 90 degree installation of console

3/8”-24 male to 3/8”-24 female 90 degree swivel adapter. For the right angle installation of older consoles/gauges with 3/8-24 threads

3/8”-24 male to 7/16”-20 female 90 degree swivel adapter A 90 degree swivel with 3/8" inlet and 7/16" outlet; for putting current consoles on older model regulators.

A 90 degree swivel with two 7/16-20 outlets for multiple consoles, gauge, or computer devices.

Regulator Overpressure Safety Valve
Certain Tek-diving applications(argon in drysuits) require use of a regulator first stage in a closed system where a high pressure seat failure can result in a burst hose or rupurted dry suit valve. This pressure relief valve is set for 300psi to carry off excess pressure without hose rupture. All stainless/brass construction.

Button Gauge

Small SPG for pony and argon regs., lets you check tank pressure before the dive. This miniature SPG screws directly into the HP port of the 1st stage and is a perfect option for an Argon reg. or Pony Reg.

High pressure Spool, rounded ends.

High pressure Spool, flat ends.

High pressure stem, washer in the middle. Often found in Dive Rite, Halcyon and OMS pressure gauges.

Quick Disconnect    

With a simple quarter turn by hand, divers are able to disconnect their dive computer or gauge from the high pressure hose. Since tools are not required, one can quickly remove the computer module to be protected, kept secure or downloaded. When ready for use again the gauge can be quickly reconnected, safely and securely. The Quick Disconnect is manufactured to be nitrox compatible.