Categories

Site Information

 Loading... Please wait...

Dive Rite CCR Wing Series

Dive Rite CCR Wing Series     Series offers 40 lbs/18.1 kg of lift and is designed for use with the TransPac, TransPlate or metal backplates. Divers may choose from our value-driven and durable 1680 ballistic nylon EXP material or our SuperFabric® brand technology XT material that we’ve married with a 1000 denier Cordura® inner shell to create an armor-clad outer bag that is impervious to damaging pinches and cuts. Both the CCR EXP (Model BC 4800) and CCR XT (Model 5500) are further enhanced with a heavy-duty, 210 denier nylon laminated bladder. They are backed by our WORRY-FREE LIFETIME GUARANTEE and are made exclusively in the U.S.A Series offers 40 lbs/18.1 kg of lift and is designed for use with the TransPac, TransPlate or metal backplates. Divers may choose from our value-driven and durable 1680 ballistic nylon EXP material or our SuperFabric® brand technology XT material that we’ve married with a 1000 denier Cordura® inner shell to create an armor-clad outer bag that is impervious to damaging pinches and cuts. Both the CCR EXP (Model BC 4800) and CCR XT (Model 5500) are further enhanced with a heavy-duty, 210 denier nylon laminated bladder. They are backed by our WORRY-FREE LIFETIME GUARANTEE and are made exclusively in the U.S.A.   Tech Specs: Model BC4800 CCR EXP outer bag is made of durable 1680 denier ballistic nylon that resists tears and abrasion Model BC5500 CCR XT outer bag is made of SuperFabric brand technology and 1000 denier Cordura® offering superior durability.Inner bladder is constructed from heavy-duty 210 denier nylon laminated bladder which is highly resistant to pinches and punctures Urethane flanges are welded in place, which make it easy to switch out corrugated hoses and over pressurization valves without tools Comes equipped with a 16-inch elbow inflator and along with a 27-inch low-pressure inflation hose. Other hoses lengths are available upon request. Two sets of marine-grade 316 stainless steel grommet mounting holes are used to attach wing to harness and set diver trim Approximate dimensions uninflated: 22-in H x 21-in W (55.8cm x 53.3cm) 3 lbs (1.4 kg)   Tips: To avoid unnecessary wear and tear, remove metal backplates from the wing for transport and do not carry a metal plate stuffed into a dive bag along with a wing and other soft goods. The CCR wing is designed so the hoses come thru the middle slots so they don’t interfere with the lift behind the head. Its standard with an elbow, however you can request a pull dump inflator, if you prefer.   Videos: BCD: XT Series Wings BCD: Worry Free Guarantee With All 2012 Dive Rite Wings BCD: Advantages of crosshair center section on wings  
    There are no products in this category.