Site Information

 Loading... Please wait...
  • Image 1

Burst Disc Plug - Brass

0.20 LBS
Calculated at checkout

Product Description

  Burst Disc Plug  - Brass



This is the correct plug to use with a three piece burst disc. The plug is flat on the bottom and will not score the burst disc.   Fits: Sherwood (old ones) Blue Steel Thermo Dive Rite Highland Salvo Halcyon   Important note: If you have a one piece burst disc you can not make it a three piece burst disc by just pulling it apart. One piece burst disc run an edge on the plug that the washer/disc combo seals to. A Three piece disc uses a flat on the plug to seal against. Do not be cheap here replace the plug. If you do not the tank will fill like normal but will keep blowing discs once it gets to higher pressure it will blow. The reason this happens is the burst disc gets scored from the plug being wrong. 

Product Reviews

Write Review

  1. Works 4 Star Review

    Posted by on 20th Oct 2014

    These are standard (3/8ths) bolts. My Dive Rite manifold was a size 10 metric bolt, but the only difference was the heads. This plug fits the Dive Rite manifold.

Click the button below to add the Burst Disc Plug - Brass to your wish list.