5# Weight Mold

  5# Weight Mold  

This is a 1 to 5lb Weight Mold. All you do with this one is fill it to the height you want with lead. There are reference marks inside for weight reference. This weight mold makes lace thru style weights. 

Read Below

Weight Mold Pouring.

First things first read about proper safety procedures to pour lead.  Do not be stupid. 

Scuba Mold Actual Info

This is my actual info on using these molds. Here are some tips that should help

1.  Heat the mold a cold mold is going to stick

2.  When the mold is hot spray it with WD40, this is my trick not a manufacturer recommendation, please remember it is fish oil based so it will flame up when      you spray it

3.  Make sure you are pouring on a flat surface.

4.  Please recognize that if you take a aluminum mold full of lead and slam it down hard you might break the mold be careful with it. Tap it on a piece of wood not hard concrete a 2 X 10 works great for this.

5. Wheel weights are not always lead, they are mainly zinc google about it.

6. Saying all this if you break a mold I do not want to hear it.  The molds are made inexpensively but hold up just fine if you cracked it that was from improper use I am sorry if that offends some of you but it is what it is.  

I hope this helps, John